Water tank & Storage vessel
Guangzhou Longkon Eco-Tech Limited

Stainless steel water storage tank cylindrical water tank

Update Time:2015-02-02 09:47:46

Stainless Steel water tank


Stainless Steel Water Tank


Typical applications include:

  • Food processing equipment, particularly in beer brewing, milk processing & wine
  • Kitchen benches, sinks, trough, equipment, tanks and appliances
  • Chemical containers, including for transport
  • Heat Exchangers
  • Woven or welded screens for mining, quarrying & water filtration
  • Threaded fasteners
  • Springs

Vertical stainless steel water tower




capacity diameter  heigtht  Thickness
(㎜) (㎜) (㎜)
0.5T 650 1720 0.5
0.8T 850 1720 0.5
1.0T 960 1730 0.5
1.2T 1050 1750 0.5
1.5T 1050 2020 0.5
1.8T 960 2300 0.5
2.0T 1050 2350 0.5
2.5T 1050 2850 0.5
2.5T 1230 2400 0.6
3.0T 1360 2400 0.6
4.0T 1360 2700 0.6
5.0T 1700 2200 0.8
6.0T 1780 2400 0.8
8.0T 2060 2400 0.9
10.0T 2300 2400 1

Horizontal stainless steel water tower



capacity diameter lenght*board*height  thickness
(㎜)    (㎜) (㎜)
0.5T 660 1420×720×990 0.5
0.8T 850 1420×930×1160 0.5
1.0T 980 1420×1040×1260 0.5
1.2T 980 1710×1040×1260 0.5
1.5T 1050 1720×1110×1340 0.5
1.8T 980 2000×1040×1260 0.5
2.0T 1050 2030×1110×1340 0.5
2.5T 1050 2600×1110×1340 0.5
2.5T 1250 2200×1300×1500 0.6
3.0T 1360 2260×1420×1640 0.6
4.0T 1360 2800×1420×1640 0.6
5.0T 1360 3300×1440×1700 0.6
6.0T 1700 2900×1800×1960 0.8
8.0T 1700 3600×1880×1960 0.9
10.0T 1700 4660×1800×1960 1
12.0T 1700 5400×1800×1960 1

 1、all the water tank can be customed as you need .
 2、storage for oil and chemical products custom-made is welcomed 






Grade 304 is the standard “18/8”; it is the most versatile and most widely used stainless steel, available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics. The balanced austenitic structure of Grade 304 enables it to be severely deep drawn without intermediate annealing, which has made this grade dominant in the manufacture of drawn stainless parts such as sinks, hollow-ware and saucepan. For these applications it is common to use special “304DDQ” (Deep Drawing Quality) variants. Grade 304 is readily brake or roll formed into a variety of components for applications in the industrial, architectural, and transportation fields. Grade 304 also has outstanding welding characteristic. Post-weld annealing is not required when welding thin sections.

Grade 304L, the low carbon version of 304, does not require post-weld annealing and so is extensively used in heavy gauge components (over about 6mm). Grade 304H with its higher carbon content finds application at elevated temperature. The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperature.

Key Properties
These properties are specified for flat rolled product (plate, sheet, and coil) in ASTM A240/A240M. Similar but not necessary identical properties are specified for other products such as pipe and bar in their respective specifications.
Typical compositional ranges for grade 304 stainless steels are given in table 1.




Fabrication Process for Stainless Steel Water Tank


 Installation Manual For Deluxe Stainless Steel Water Tank


1) The tank must be installed on a flat and even surface with a strong support.
2) Water outlet and discharge point should use BSPT 304 pipe fitting and other non-ferrous andnon-poisonous product (ABS, PVC & Polypipe).
3) Stop-cock should be placed at the end of the outlet for emergency case.
4) Overflow point should have tracked-connecter, water hose shall be added if necessary.
5) Outlet point shall be fixed with tracked-connector.
6) Discharge point at the centre location of the bottom tank shall be fixed with tracked-connector.
7) Any extra water outlet should be requested before fabrication. No alteration or additional ofwater outlet provided after purchase.
8) All the water pipes connected to the tank openings must be firmly installed to avoid any vibration that resulting rings at the opening loose. 
9) Discharge point should have pipe and valve in order to discharge any dirty water or sediment fromthe tank. Recommended to discharge regularly.
10) Use 1/4 inch diameter stainless steel bolt and nut to tighten up the top cover.
11) This stainless steel tank provided with air vent at the top.
12) The location for tank installation must be far away from chemical materials or liquids.
13) Do not use underground source water or contaminated water or chemical for storage.

Ensure all pipes connected to the tank are well supported and properly alligned.









Place water tank on a flat and even surface with strong support.

Avoid place water tank on uneven and unstable surface. This to ensure water tank well-balanced and stable.



The tank location must be located far away from chemical, air-conditioner, flammable materials and cooling tower.

Do not place water tank near chemical, air-conditioner, flammable materials and cooling tower to prevent any vapour or heat that could affected the properties of the tank.



Always use SUS 304 pipe fittings, other non-ferrous and non-poisonous (ABS, PVC & polypipe) to connect with water tank's outlet and discharge points.

Never use any ferrous pipe fittings to connect with water tank's outlet and discharge. The ferrous pipe fittings easily can be rusted and corroded.



Overflow point must be connected with pipe or hose.

Do not purposely left overflow without any connection. It is veryhard to detect any malfunction of ball-valve if the overflow notconnected with pipe or hose.



Connect discharge point with ball valve or stopcock to eliminatesediment or dirt from the water tank easily.

Avoid connect discharge point with socket since it is hard to eliminate sediment or dirt by using spanner instead of ball-valveor stopcock.



Always make sure all water pipes connected to the water tankfirmly installed, well-supported and properly alligned.

Avoid connect water tank with pipes that not properly alligned and well-supported, since it is easily leak or burst.



It is recommended to place water tank in the well-ventilatedarea, and easy for accessibility.

Do not place water tank in the tiny area since it has poor airventilation and hard to access for maintenance and service.